Die elastischen Eigenschaften von Beton unter bi-axiale Belastung. Druck im rechten Winkel, die 6 als downloadvorgang Abbildung ihrer Zahl mit der Hälfte als greatcompression in eine Richtung geprüft wurden, wie die anderen, jene, die 7 als Dritte f ig - ure ihrer Zahl wurden mit einem Com-repressive Druck getestet. Die Exemplare, die hatte 0 als dritte figureof ihre Anzahl Balken, ein l^ nowledge der Exemplare aus einer Charge gekreuzt wurden oftenvaluable ist bei der Interpretation der Ergebnisse. Die Termine der malcing thespecimens waren wie folgt: Am 2. Oktober S, 1911, 2051 und 2001 mit zwei 8-in.-Würfel,

• Bildanbieter: The Reading Room / Alamy Stock Foto
• Bild-ID: 2AN6P6G
• Dateigröße: 7,1 MB (147,8 KB Komprimierter Download)
• Freigaben (Releases): Model - nein | Eigentum - nein
• Format: 1383 x 1807 px | 23,4 x 30,6 cm | 9,2 x 12 inches | 150dpi

Weitere Informationen

Dieses Bild ist ein gemeinfreies Bild. Dies bedeutet, dass entweder das Urheberrecht dafür abgelaufen ist oder der Inhaber des Bildes auf sein Urheberrecht verzichtet hat. Alamy berechnet Ihnen eine Gebühr für den Zugriff auf die hochauflösende Kopie des Bildes.

Dieses Bild kann kleinere Mängel aufweisen, da es sich um ein historisches Bild oder ein Reportagebild handel

The elastic properties of concrete under bi-axial loading . pressions at right angles, those which had 6 as thethird figure of their number were tested with half as greatcompression in one direction as the other, those which had 7as the third f ig-ure of their number were tested with one com-pressive stress. The specimens which had 0 as the third figureof their number were crossed beams, A l^nowledge of the specimens made from a batch is oftenvaluable in interpreting the results. The dates of malcing thespecimens were as follows: On October 2S, 1911, specimens2051 and 2001with two 8-in. cubes, three G-in. cubes, one 3-in.cylinder and one control beam were made from one batch. OnNovember 1, 2050 with three S-in. cubes and one S-in. cylinderwere made. On ITovember 2, 2002 and 2052 with two s-in, cubesthree 6-in. cubes, one 3-in. cylinder and one control beamwere made from one batch. On November 8, 2061 and 2071 with two |S-in. cubes, three 3-in. cubes and two 3-in. cylinders were made |from one batch. On November 11, 2062 and 2072 with two S-in.. 23 cubes, three 6-in. cubes and two s-in. cylinders 7;ere made fromone batch. On November 18, 2003 and 206Z with tro S-in. cubes, three G-ln. cubes, one 3-in. cylinder and one control bearn weremade from the same batch. On November 25, 2062 and 2073 withtwo S-in. cubes, three 6-in. cubes and one 3-in. cylinder weremade from one batch. These comprised the first run of testsand were all hand-mixed concrete. The other specimens weremachine-mixed concrete made on the dates given below. On January25, 1912, 2055 consisting of t?;o s-in. cubes and three S-in.cubes was made. On February 7, t?7o S-in. cubes and three 3-in.cubes v/ere made and marl<:ed 2056. On February 20, two S-in.cubes and three 6-in. cubes were made and marlced 2057. OnMarch 1, two s-in. cubes and three S-in. cubes were made andmarked 2058. On Llarch 6, 2054 and 2059, compression specimens, were made with three 6-in. cubes and one S-in. cylinder, fromone batch. A s

Stockbilder mithilfe von Tags suchen

• bookcentury1900
• bookdecade1910
• booksubjecttheses
• bookyear1912